Building Wrap Banners in Dubai: Printing at the Size of a Facade
A building wrap is the largest thing we print, and at a certain size the rules change. Building wrap banners in Dubai are not one banner but a set of enormous drops engineered to hang off scaffold, survive wind at height and be installed by people on a rope.
Material: 440gsm frontlit PVC · Finishing: Hemmed with eyelets · Installation: Supply only
An estimator replies with a firm, VAT-inclusive price and a production date.From your file to the finished job.
Six steps happen between the brief and the finished job. Here they are, in the order they happen on our floor in Dubai South.
The Scaffold Comes First
Nothing is specified until we know what the wrap is hanging from. Tube spacing, tie points and whether the scaffold is sheeted already all decide the panel size and the fixing method. The structure leads, the graphic follows.
It Is Split Into Drops
The facade is divided into vertical drops sized to what a crew can control in air. A drop too wide becomes impossible to handle at height, even in light wind, so panel width is an installation decision before it is a design one.
Mesh Is Usually Not Optional
At this scale the wind load on solid material is severe. Printed mesh with a defined open area lets air through and is what most building wraps are produced on. It also keeps light into the floors behind it, which matters if anyone is working in there.
Edges Are Rope Stitched
Every drop gets a cord sewn into the hem so the whole edge takes tension as a line. Installers tie to the rope, never through the material, and that is what stops a wrap tearing at its fixings.
Coming Down
Wraps are removed drop by drop in reverse order. Panels are often reusable if the next phase needs the same artwork.
Seams Are Positioned Deliberately
Where drops meet, the join runs the full height of the building and cannot be hidden. We place those seams on an architectural line, a column or a floor division, so the eye reads them as part of the facade. Seams falling across a face or a word are visible from a long way off.
We have to be clear about one thing. Wraps at this size involve structural and permit considerations beyond printing, and that work sits with your contractor and the authority. We produce and install the graphic to the engineer's requirements, we do not replace them.
Related: rope stitch finishing, mesh banners, and hoarding banners.
What you get.
- Material
- 440gsm frontlit PVC · 510gsm heavy-duty PVC · Mesh PVC · Blockout PVC
- Finishing
- Hemmed with eyelets · Pole pockets · Rope-stitched edges · Trimmed only
- Installation
- Supply only · Installed by our team
- Size
- Made to your width and height
- Turnaround
- Usually 2–3 working days; installation scheduled on request
- Proof
- A digital proof before anything prints
- Delivery
- All seven emirates, or collect from Dubai South
What every order includes
- A free prepress check on your file
- A digital proof before anything prints
- One VAT-inclusive quote with a production date
- Delivery to all seven emirates, or collection from Dubai South
Setting up your file.
- 01Work at full size or to scaleBuild the file at full size, or at a stated scale such as 1:10 when the canvas gets too big, and tell us the scale.
- 02Match resolution to distanceSomething read from a few metres away needs far less resolution than a business card. Around 100 dpi at full size is usually plenty.
- 03Tell us how it will be fixedHems, eyelets, pole pockets and frames take up material around the edge. Tell us the fixing and prepress allows for it.
- 04Send logos as vectorsAI, EPS, SVG or PDF keeps edges sharp at large sizes. Embed or outline the fonts.
Quick answers.
Any facade, built from engineered drops.
Yes, with a trained crew and the contractor's access.
Mesh for almost all wraps, for wind and light.