Rope Stitch Banners in Dubai: A Cord Sewn Into the Edge
On a very large banner, eyelets stop being enough. The load between them is too great and the material starts to lift. Rope stitch banners in Dubai solve it by sewing a continuous cord into the hem so the whole edge pulls as one line instead of at twenty separate points.
Banner material: 440gsm frontlit PVC · Where it will hang: Outdoors
An estimator replies with a firm, VAT-inclusive price and a production date.From your file to the finished job.
Six steps happen between the brief and the finished job. Here they are, in the order they happen on our floor in Dubai South.
Cord Is Laid Into the Fold
A polyester rope runs inside the hem before it is closed, following the full length of the edge. From the front you see nothing except a slightly thicker border.
The Hem Is Sewn Around It
A machine runs close alongside the cord, trapping it in a sealed channel. The rope can shift slightly inside the channel, which is intentional, letting the edge take up tension evenly instead of snagging at one spot.
The Ends Are Left Long
Cord is left proud at the corners so it can be tied off directly to a frame or a fixing. On big installs the installer ties the rope and never touches the banner material at all.
Eyelets Can Still Go Through
Many rope stitched banners also carry eyelets, now punched through hem and cord together. That combination is about as strong as a flexible banner edge gets.
Where It Gets Used
Building wraps, scaffold banners, stadium and long fence runs, and anything that will be tensioned hard across a span.
Cord Thickness Follows the Span
A six millimetre cord suits most hoarding runs. Building wraps and anything tensioned across a scaffold go up to eight or ten, because a thin rope under heavy load stretches and the edge goes slack in the middle of the run. Thicker cord also gives an installer something substantial to grip and tie against at height.
We will be direct about when this is overkill. Below about three metres, a hemmed and eyeletted edge is entirely adequate and rope stitching is money you do not need to spend. It comes into its own on building wraps and long hoarding runs.
See also building wrap banners, banner finishing, and outdoor banners.
What you get.
- Banner material
- 440gsm frontlit PVC · Mesh PVC · Polyester fabric
- Where it will hang
- Outdoors · Indoors
- Size
- Made to your width and height
- Turnaround
- Usually 2–3 working days
- Proof
- A digital proof before anything prints
- Delivery
- All seven emirates, or collect from Dubai South
What every order includes
- A free prepress check on your file
- A digital proof before anything prints
- One VAT-inclusive quote with a production date
- Delivery to all seven emirates, or collection from Dubai South
Setting up your file.
- 01Work at full size or to scaleBuild the file at full size, or at a stated scale such as 1:10 when the canvas gets too big, and tell us the scale.
- 02Match resolution to distanceSomething read from a few metres away needs far less resolution than a business card. Around 100 dpi at full size is usually plenty.
- 03Tell us how it will be fixedHems, eyelets, pole pockets and frames take up material around the edge. Tell us the fixing and prepress allows for it.
- 04Send logos as vectorsAI, EPS, SVG or PDF keeps edges sharp at large sizes. Embed or outline the fonts.
Quick answers.
On spans over about three metres or anything tensioned hard.
Only as a slightly thicker edge.
Yes, punched through hem and rope together.