Forex Self Standees in Dubai: The Foot Is Part of the Sheet
A self standee has no separate strut to attach or lose. The support is cut from the same sheet as the shape and folds out behind it. Forex self standees in Dubai are built for situations where somebody else will be setting them up without instructions.
Quantity: 1 standee · Height: Up to 1.2 m · Cutting: Contour cut to shape
An estimator replies with a firm, VAT-inclusive price and a production date.From your file to the finished job.
Six steps happen between the brief and the finished job. Here they are, in the order they happen on our floor in Dubai South.
The Support Is Routed From the Same Board
A tongue is cut from the back panel and scored so it hinges outwards. Nothing is glued on, nothing arrives separately, and there is no component that can go missing between venues.
It Sets Up in One Movement
Lift it, fold the support out, stand it down. No tools, no tabs to locate, and nobody has to work out which way round anything goes.
Rigid PVC Takes the Hinge
Forex scores and folds without cracking, which cardboard manages poorly and foamboard not at all. The material is what makes an integral hinge work repeatedly.
The Angle Is Fixed at Production
How far the support folds out decides the lean. We set it against the height and the weight of the piece, because a shallow angle on a tall standee lets it tip forwards.
It Folds Flat Again
The support closes back into the profile for storage, so a set of these stacks like flat sheets between uses.
Cut, Scored and Tested
Each one is folded out and stood up here before it ships, since a score line cut slightly too deep weakens the hinge and that only shows when it is used. Order a few more than you need for a retail rollout. These go to multiple branches and are set up by staff who have never seen one, and the spares cover the handful that get folded the wrong way on the first attempt.
A fair limitation: an integral support is less adjustable than a separate strut and foot plate. On an uneven floor or a thick carpet, a standee with a proper base plate stands more reliably than one balancing on a folded tongue.
Compare with Forex board standees, Toblerone standees, and cutout standees.
What you get.
- Height
- Up to 1.2 m · 1.2–1.8 m · Over 1.8 m
- Cutting
- Contour cut to shape · Rectangular
- Quantities
- 1 · 2 · 5 · 10 standees, or any other number
- Turnaround
- Usually 2–4 working days
- Proof
- A digital proof before anything prints
- Delivery
- All seven emirates, or collect from Dubai South
What every order includes
- A free prepress check on your file
- A digital proof before anything prints
- One VAT-inclusive quote with a production date
- Delivery to all seven emirates, or collection from Dubai South
Setting up your file.
- 01Work at full size or to scaleBuild the file at full size, or at a stated scale such as 1:10 when the canvas gets too big, and tell us the scale.
- 02Match resolution to distanceSomething read from a few metres away needs far less resolution than a business card. Around 100 dpi at full size is usually plenty.
- 03Tell us how it will be fixedHems, eyelets, pole pockets and frames take up material around the edge. Tell us the fixing and prepress allows for it.
- 04Send logos as vectorsAI, EPS, SVG or PDF keeps edges sharp at large sizes. Embed or outline the fonts.
Quick answers.
No. The support is cut from the same sheet.
Yes, the support closes back into the profile.
Less reliably. A base plate is better on thick carpet.