Pole Pocket Banners in Dubai: A Sleeve Sewn to Fit Your Pole
A pole pocket is a tube sewn into the top or bottom edge so a bar can slide through it. Pole pocket banners in Dubai hang flat and still because the weight is carried along the whole width instead of at a handful of points, which is why they are used for anything that needs to look like a wall.
Banner material: 440gsm frontlit PVC · Where it will hang: Outdoors
An estimator replies with a firm, VAT-inclusive price and a production date.From your file to the finished job.
Six steps happen between the brief and the finished job. Here they are, in the order they happen on our floor in Dubai South.
We Ask for the Diameter First
The pocket is made to the pole you already have. A sleeve a few millimetres too tight will not take the bar at all, and one too loose lets the banner slide sideways along it and hang off centre.
The Hem Is Folded Deeper
Instead of turning back two centimetres, the edge folds back far enough to wrap the pole with clearance. That means the banner is printed with a deeper margin on the pocket edges, decided before printing.
The Seam Runs the Full Width
One continuous weld or stitch line closes the tube. Any gap in it becomes the place the pole catches when someone feeds it through in a hurry.
Top Only, or Top and Bottom
A top pocket alone lets the banner hang free and move. Adding a bottom pocket with a weighted bar holds it flat and still, which is what you want for a backdrop that will be photographed.
Fitting It
Slide the pole through, hang from the ends or from cord at each end. No tools and nothing to punch.
A Weight Bar at the Bottom
Where a banner hangs free in a lobby or an atrium, the bottom pocket takes a weighted bar instead of a fixed pole. The weight pulls the fabric straight without anchoring it to the floor, so the banner stays flat and still moves slightly in air. Without it, a free hanging banner curls at the lower corners within a week.
Something people discover late. Pocket edges lose a few centimetres of visible artwork to the fold. We allow for it in the layout, but it means any design with text close to the top or bottom edge needs rearranging before it goes on the machine.
Related: hemmed banners, fabric banners, and all finishing.
What you get.
- Banner material
- 440gsm frontlit PVC · Mesh PVC · Polyester fabric
- Where it will hang
- Outdoors · Indoors
- Size
- Made to your width and height
- Turnaround
- Usually 2–3 working days
- Proof
- A digital proof before anything prints
- Delivery
- All seven emirates, or collect from Dubai South
What every order includes
- A free prepress check on your file
- A digital proof before anything prints
- One VAT-inclusive quote with a production date
- Delivery to all seven emirates, or collection from Dubai South
Setting up your file.
- 01Work at full size or to scaleBuild the file at full size, or at a stated scale such as 1:10 when the canvas gets too big, and tell us the scale.
- 02Match resolution to distanceSomething read from a few metres away needs far less resolution than a business card. Around 100 dpi at full size is usually plenty.
- 03Tell us how it will be fixedHems, eyelets, pole pockets and frames take up material around the edge. Tell us the fixing and prepress allows for it.
- 04Send logos as vectorsAI, EPS, SVG or PDF keeps edges sharp at large sizes. Embed or outline the fonts.
Quick answers.
Whatever you have. Send the diameter.
Both if it needs to hang flat and still.
A few centimetres per pocketed edge.