Stitched Fabric Banners in Dubai: Where the Needle Goes
A stitched edge is the oldest way to finish cloth and it is still the strongest. Stitched fabric banners in Dubai go from the heat press to a long industrial machine where someone turns every edge twice and runs it through. The stitching is the part that decides whether the banner lasts one event or twenty.
Fabric: Polyester knit · Edge finish: Hemmed
An estimator replies with a firm, VAT-inclusive price and a production date.From your file to the finished job.
Six steps happen between the brief and the finished job. Here they are, in the order they happen on our floor in Dubai South.
The Edge Is Turned Twice
The raw edge folds under once, then again, so the cut end finishes inside the hem where nothing can reach it. A single fold leaves fibres exposed and they work loose over time.
Thread Is Matched to the Cloth
Polyester thread on polyester fabric. Cotton thread looks fine on day one and perishes faster than the banner does, which is how you end up with a sound graphic held together by nothing.
Corners Get Extra Passes
Every corner is reinforced with a short bar of dense stitching. Corners take the load when a banner is pulled tight, and an unreinforced corner is where a tear starts.
Fixings Go In Through the Hem
Eyelets, tabs or loop tape are added after stitching so they pass through the doubled layer. Punching a fixing through single thickness fabric is the most common failure we are asked to repair.
How It Looks
A stitched hem leaves a visible line about a centimetre in from the edge. Some clients like it and some would rather the edge disappeared, which is what a heat cut finish gives you.
Double Sided Versions
Two printed faces can be stitched together around a blockout layer so neither side shows through to the other. The three layers are sewn as one at the hem, which makes the edge slightly thicker and considerably stronger. These are used for hanging signs where people walk past both sides.
To be plain about the cost. Stitching takes longer than a heat cut edge and the price reflects that. For a banner used once at an internal event, the extra is hard to justify. For anything travelling or reused, it pays for itself the second time out.
Compare with heat cut fabric banners, or see fabric banners and banner finishing.
What you get.
- Fabric
- Polyester knit · Blockout fabric · Backlit fabric
- Edge finish
- Hemmed · Silicone edge graphic · Velcro strips · Pole pockets
- Size
- Made to your width and height
- Turnaround
- Usually 3–4 working days
- Proof
- A digital proof before anything prints
- Delivery
- All seven emirates, or collect from Dubai South
What every order includes
- A free prepress check on your file
- A digital proof before anything prints
- One VAT-inclusive quote with a production date
- Delivery to all seven emirates, or collection from Dubai South
Setting up your file.
- 01Work at full size or to scaleBuild the file at full size, or at a stated scale such as 1:10 when the canvas gets too big, and tell us the scale.
- 02Match resolution to distanceSomething read from a few metres away needs far less resolution than a business card. Around 100 dpi at full size is usually plenty.
- 03Tell us how it will be fixedHems, eyelets, pole pockets and frames take up material around the edge. Tell us the fixing and prepress allows for it.
- 04Send logos as vectorsAI, EPS, SVG or PDF keeps edges sharp at large sizes. Embed or outline the fonts.
Quick answers.
Yes, clearly, for anything reused or hung under tension.
Yes, about a centimetre from the edge.
Polyester, matched to the fabric.