Wall Mounted Flags in Dubai: Out From the Wall, Above the Floor
Where there is no floor space, the flag goes on the wall. A bracket holds the pole at an angle so the flag projects out over the room instead of standing in it. Wall mounted flags in Dubai suit corridors, entrance halls and anywhere a floor stand would be in the way.
Quantity: 1 flag · Size: Table size · Finish: Printed polyester · Stand: Chrome stand
An estimator replies with a firm, VAT-inclusive price and a production date.From your file to the finished job.
Six steps happen between the brief and the finished job. Here they are, in the order they happen on our floor in Dubai South.
The Bracket Sets the Angle
Most brackets hold the pole at around forty five degrees. That angle lets the flag drape clear of the wall instead of lying against it, which is what happens if the pole is mounted horizontally.
Height Clears Everybody
The lowest point of the flag has to clear head height with room to spare, since the fabric moves when a door opens. We set the bracket height from the finished floor, not from a ceiling line.
The Fixing Takes a Lever Load
A pole projecting from a wall multiplies the force at the bracket. On plasterboard that means fixing into the stud, and on blockwork a proper anchor. This is not a job for wall plugs alone.
Flags Are Usually Smaller
A wall mounted flag is typically shorter than a floor standing one, because length that would be fine vertically becomes a hazard projecting over a walkway.
Several Read as a Row
Mounted at consistent spacing and height along a corridor or above an entrance, a set of these is one of the few ways to carry flags in a building with no floor to give up.
Supplied With Brackets
Bracket, pole, finial and flag come as a set, with fixings matched to the wall type you tell us about. Where several go along a corridor, we fit the first, stand back with you, and only then drill the rest. Spacing that looks right on a drawing often wants adjusting against the actual wall.
A practical caution: once drilled, these are permanent. Confirm the position with a bracket held up and a flag offered to it before anything is fixed, because a wall mounted flag two hundred millimetres too low is in somebody's way forever.
See also conference flags, hoisting flags, and indoor corporate flags.
What you get.
- Size
- Table size · Floor-standing · Custom size
- Finish
- Printed polyester · Satin with fringe
- Stand
- Chrome stand · Gold-finish stand · Wall bracket · No stand
- Quantities
- 1 · 5 · 10 · 25 · 50 flags, or any other number
- Turnaround
- Usually 3–5 working days
- Proof
- A digital proof before anything prints
- Delivery
- All seven emirates, or collect from Dubai South
What every order includes
- A free prepress check on your file
- A digital proof before anything prints
- One VAT-inclusive quote with a production date
- Delivery to all seven emirates, or collection from Dubai South
Setting up your file.
- 01Work at full size or to scaleBuild the file at full size, or at a stated scale such as 1:10 when the canvas gets too big, and tell us the scale.
- 02Match resolution to distanceSomething read from a few metres away needs far less resolution than a business card. Around 100 dpi at full size is usually plenty.
- 03Tell us how it will be fixedHems, eyelets, pole pockets and frames take up material around the edge. Tell us the fixing and prepress allows for it.
- 04Send logos as vectorsAI, EPS, SVG or PDF keeps edges sharp at large sizes. Embed or outline the fonts.
Quick answers.
Around forty five degrees, so the flag drapes clear.
Only fixed into the stud behind.
Well clear of head height, measured from the floor.